This is a press machine, which is generally a device that compresses a flat material to form desired shapes. If the machine is equipped with a sensor that checks input signals, input signal check is available. The standard machine WCI can only be operated with the controller IO.
|
Item |
Description |
|---|---|
|
out_Machine_Start |
This configures the output signal for starting the press machine. |
|
Machine_Ready_in |
This configures the input signal for authorizing press machine operation. |
This is a test function for the press machine WCI.
|
Test Function |
Description |
|---|---|
|
Machine_Start |
It operates the machine with the out_Machine_Start signal on. |
|
Reset_IO |
It is a function that turns off an output signal that is turned on. |
|
Check_Machine_Input |
It waits for the machine ready input signal. (Timeout = 10 seconds) |