To set the network, follow these steps:
-
Tap the Settings button of the main menu and select Network.
-
Select the Controller or Modbus tab.Controller: Ethernet network settings for external connections such as the controller or Modbus can be configured.Modbus: Additional settings for user-defined Modbus including Modbus TCP/RTU and additional settings for Preset Modbus used by some Workcell items can be set.
-
Select the network method and tap the Confirm button.
-
When setting IP address of the controller, the address in 10.0.0.X range which is used by assigning internally, cannot be used.
-
To be able to set and use DHCP in A-Series models, it is necessary to purchase an external router and configure a network.