Screen Saver Mode Setting

If the teach pendant is not used for a set amount of time, the system enters screen saver mode.

• The robot can enter screen saver mode even if it is operating in Auto mode.

• Tap the Return button on the screen saver to return to the previous screen.

To configure the screen saver mode, follow these steps:

1. Tap the Settings button on the main menu and select Screen Saver.

2. Screen saver use can be configured in the Screen Saver Setting screen.The default setting is Use Screen Saver.

3. This configures the time required to elapse before entering the screen saver mode.Default: 5 minutesMinimum Time: 1 minuteMaximum Time: 24 hours (1440 minutes)

4. Tap the Confirm button.