struct.ADJUST_WELDING_SETTING

This structure contains information for adjusting welding settings.

_bRealTime indicates whether real-time adjustment is enabled. A value of 0 means preset mode, and a value of 1 means real-time adjustment mode.
_bResetFlag indicates the reset flag. A value of 0 means to maintain the current value, and a value of 1 means to reset to the set value.
_fTargetVol, _fTargetCur, and _fTargetVel represent the target voltage, target current, and target speed, respectively.
_fOffsetY and _fOffsetZ represent the weaving Y offset and weaving Z offset, respectively.
_fWidthRate represents the weaving width rate.

BYTE#	Member Variable	Data Type	Value	Description
0	`_bRealTime`	`unsigned char`	0 or 1	Real-time adjustment status (0: Preset, 1: Real-time)
1	`_bResetFlag`	`unsigned char`	0 or 1	Reset Flag ( 0: Maintain Current Value, 1: Reset)
2	`_fTargetVol`	`float`		Target Voltage
6	`_fTargetCur`	`float`		Target Current
10	`_fTargetVel`	`float`		Target Speed
14	`_fOffsetY`	`float`		Weaving Y Offeset
18	`_fOffsetZ`	`float`		Weaving Z Offset
22	`_fWidthRate`	`float`		Weaving Width Rate