struct.CONFIG_ANALOG_WELDING_INTERFACE

This structure contains analog welding interface configuration information.

_bMode member variable sets the analog welding interface mode. A value of 0 means stop, and a value of 1 means start.
_tTargetVoltage, _tFeedingSpeed, _tWeldingVoltage, and _tWeldingCurrent member variables are CONFIG_WELDING_DETAIL_INFO structures that contain detailed configuration information for target voltage, feeding speed, welding voltage, and welding current, respectively.
_iArcOnDO, _iGasOnDO, _iInchPDO, and _iInchNDO member variables represent the DO numbers to be used for arc start, gas start, inch plus, and inch minus, respectively.
_iBlowOutValue member variable represents the blowout value.

BYTE#	Member Variable	DataType	Value	Descriptions
0	`_bMode`	`unsigned char`	0 or 1	Analog Welding Interface Mode (0: stop, 1:start)
1	`_tTargetVoltage`	`CONFIG_WELDING_DETAIL_INFO`		Target Voltage Configuration
17	`_tFeedingSpeed`	`CONFIG_WELDING_DETAIL_INFO`		Target Speed Configuration
33	`_tWeldingVoltage`	`CONFIG_WELDING_DETAIL_INFO`		Welding Voltage Configuration
49	`_tWeldingCurrent`	`CONFIG_WELDING_DETAIL_INFO`		Welding Current Configuration
65	`_iArcOnDO`	`unsigned char`	0 ~ 16	Arc Starting DO number
66	`_iGasOnDO`	`unsigned char`	0 ~ 16	Gas Starting DO Number
67	`_iInchPDO`	`unsigned char`	0 ~ 16	Inch Plus DO number
68	`_iInchNDO`	`unsigned char`	0 ~ 16	Inch Minus DO number
69	`_iBlowOutValue`	`unsigned char`	0 ~ 16	Blowout Value