struct.CONFIG_WELD_SETTING

The structure contains welding configuration information.

_bVirtualMode indicates whether the virtual welding mode is enabled.
_fTargetVol, _fTargetCur, and _fTargetVel represent the target voltage, target current, and target speed respectively.
_fTargetMinVel, and _fTargetMaxVel represent the minimum target speed and maximum target speed, respectively.
_tDetail is a structure that contains detailed welding configuration information.
- _fRs, _fTss, _fTas, _fTwc, _fRf, _fTaf, and _fTsf represent the start rate, shieldinggas release time, start current time, welding condition change time, end rate, end current time, and end shielding gas release time, respectively.

BYTE#	Member Variable	Data Type	Value	Description
0	`_bVirtualMode`	`unsigned char`	0 or 1	whether the virtual welding mode is enabled. (0: deactive, 1: active)
1	`_fTargetVol`	`float`		Target Voltage
5	`_fTargetCur`	`float`		Target Current
9	`_fTargetVel`	`float`		Target Speed
13	`_fTargetMinVel`	`float`		Target Minumum Speed
17	`_fTargetMaxVel`	`float`		Target Maximum Speed
21	`_tDetail._fRs`	`float`		Start Rate
25	`_tDetail._fTss`	`float`		Shielding Release time
29	`_tDetail._fTas`	`float`		Start current time
33	`_tDetail._fTwc`	`float`		Welding condition change time
37	`_tDetail._fRf`	`float`		End rate
41	`_tDetail._fTaf`	`float`		End current time
45	`_tDetail._fTsf`	`float`		End shielding gas release time