Breadcrumbs

struct.CONFIG_ANALOG_WELDING_SETTING

This structure contains analog welding configuration information.

  • The _iVirtualWelding member variable sets the virtual welding mode. A value of 0 means actual welding, and a value of 1 means virtual welding.

  • The _fTargetVoltage, _fTargetCurrent, and _fTargetVel member variables set the target voltage, target current, and target speed, respectively.

  • The _fMinVel and _fMaxVel member variables set the minimum speed and maximum speed, respectively.

  • The _tDetail member variable is a structure that contains detailed welding configuration information.

  • The _fRs, _fTss, _fTas, _fTwc, _fRf, _fTaf, and _fTsf variables represent the start rate, shielding gas release time, start current time, welding condition change time, end rate, end current time, and end shielding gas release time, respectively.

  • The _fStartVoltage and _fEndVoltage variables represent the start voltage condition and end voltage condition, respectively.

  • The _fTargetFeedingSpeed member variable sets the target feeding speed.

BYTE#

Member Variable

Data Type

Value

Description

0

_iVirtualWelding

unsigned char

0 or 1

0: Real Welding

1: Virtual WElding

1

_fTargetVoltage

float


Target Voltage

5

_fTargetCurrent

float


Target Current

9

_fTargetVel

float


Target Speed(mm/sec)

13

_fMinVel

float


Minimum Speed

17

_fMaxVel

float


Maximum Speed

21

_tDetail._fRs

float


Start Rate

25

_tDetail._fTss

float


Shielding Gas Release time(sec)

29

_tDetail._fTas

float


Start Current Time (sec)

33

_tDetail._fTwc

float


Welding Condition changed time(sec)

37

_tDetail._fRf

float


Terminate Ratio

41

_tDetail._fTaf

float


Terminate Current Time (sec)

45

_tDetail._fTsf

float


Terminated shielding Gas Release time(sec)

49

_tDetail._fStartVoltage

float


Start Voltage Condition

53

_tDetail._fEndVoltage

float


Terminate Voltage Condition

57

_fTargetFeedingSpeed

float


Target Feeding Speed