This skill operates the gripper and releases the target when the robot moves to a specific point or approaches and contacts the work table.
-
Recommended Default WCI: Gripper (GripperDA, GripperSA)
-
Create Skill: TaskBuilder → Add Gripper (Skill Type: End-Effector & Pattern)
-
Optional Features: Add pattern, approach pose and retract pose settings, Compliance Control and Contact Sensing functions
-
Confirm Condition:Select Gripper and Pattern and press the Set button (Pattern selection can be omitted).Save Teaching PoseEven if a pattern is not used, gLoopCountRev must be selected under Repeat Condition.
Default Motion Sequence
Move to Approach Pose → Move to Teaching Pose (if a pattern is added, move to Pattern Calculation Pose) → Gripper Motion (Release) → Move to Retract Pose
Definition of Skill Screen
|
Item |
Description |
Default Value and Input Range |
|
|
Basic Setting |
Gripper |
I/O test available upon gripper selection |
|
|
Pattern |
Select if a pattern is used |
|
|
|
Reference Pose |
Teaching Pose - This is the point where the workpiece is released from a gripper. - Reference Pose changes to Position Referenced during pattern setting. |
|
|
|
Task Setting |
Repeat Condition |
Select Repeat Index - The repeat condition is used as the pattern index when a pattern is used. |
|
|
Task Velocity |
This is the velocity from the approach pose to teaching pose. - During pattern use, Task Velocity is the velocity until each pattern point. |
100 mm/s [0.001 ~ 8000] |
|
|
Task Acceleration |
This is the acceleration from the approach pose to teaching pose. - During pattern use, Task Acceleration is the velocity until each pattern point. |
0.1 m/s2 [0.001 ~ 20] |
|
|
Gripper Setting |
Set TCP (Option) |
Select TCP Setting Status - When Set TCP is set to True, it configures the TCP of the End-Effector used by the skill. |
True [True, False] |
|
Gripper Wait Time |
Standby time after release motion. |
0.5 s [0 ~ 10000] |
|
|
Tool Weight |
If a workpiece is released, apply the weight information. - To apply tool weight to a skill, save the tool weight with a workpiece grasped under the WCM Tool Weight. |
|
|
|
Approach Pose Setting (Option) |
Approach Distance |
Distance from the teaching pose in x, y and z directions - The approach distance must be entered in a 1 x 3 array (i.e. [x, y, z]). - During pattern setting, the approach distance set in the pallet UI is applied. |
[0, 0, -100] mm [Individually -1000 ~ 1000] |
|
Velocity for App. Pose |
This is the motion velocity to the approach pose. |
250 mm/s [0.001 ~ 8000] |
|
|
Acceleration for App. Pose |
This is the motion acceleration to the approach pose. |
0.25 m/s2 [0.001 ~ 20] |
|
|
Motion Time for App. Pose |
This is the motion time to the approach pose. - If a motion time of greater than 0 is entered, the Velocity/Acceleration values are ignored. |
0 s [0 ~ 10000] |
|
|
Blending Radius for App. Pose |
This is the blending radius connecting the movement between the approach pose and the teaching pose. - If a blending radius of greater than 0 is entered, all optional items (Set TCP / Compliance Control / Contact Sensing Setting) must be set as False. |
0 mm [0 ~ 1000] |
|
|
Retract Pose Setting (Option) |
Retract Distance |
Distance from the teaching pose in x, y and z directions - The retract distance must be entered in a 1 x 3 array (i.e. [x, y, z]). - During pattern setting, the retract distance set in the pallet UI is applied. |
[0, 0, -100] mm [Individually -1000 ~ 1000] |
|
Velocity for Ret. Pose |
This is the motion velocity to the retract pose. |
100 mm/s [0.001 ~ 8000] |
|
|
Acceleration for Ret. Pose |
This is the motion acceleration to the retract pose. |
0.1 m/s2 [0.001 ~ 20] |
|
|
Motion Time for Ret. Pose |
This is the motion time to the retract pose. - If a motion time of greater than 0 is entered, the Velocity/Acceleration values are ignored. |
0 s [0 ~ 10000] |
|
|
Blending Radius for Ret. Pose |
This is the blending radius connecting the movement between the teaching pose and the retract pose. |
0 mm [0 ~ 1000] |
|
|
Compliance Control Setting |
Compliance control (Option) |
Select Compliance Control Status |
False [True, False] |
|
Stiffness |
Stiffness Setting |
x=y=z= 3000 N/m [0 ~ 20000] rx=ry=rz= 200 Nm/rad [0 ~ 1000] |
|
|
Contact Sensing Setting (Option) |
Task Direction |
Orientation setting during force control - Orientation is based on Tool Coordinates. |
Z [X, Y, Z] |
|
Contact Margin |
Margin for contact sensing section setting - The contact sensing section is configured by adding the +/- contact sensing margin from the teaching point. |
2 mm [0 ~ 100] |
|
|
Desired Force |
Target Force Value - Target force must be greater than the sense value, and the absolute value must be greater than 10N(In the case of A series, there is no limit to the desired force value). |
12 N [-1200 ~ 1200] |
|
|
Contact Force |
This is the reference force for contact sensing. |
10 N [0 ~ 1200] |
|
|
Timeout |
This is the contact sensing time. |
10 s [0 ~ 10000] |
|